资 源 简 介
The following information is relative to one 2Mx8 Flashmemory device. If you are using a module with multipledevices organized to increase bus width (x16, x32), allreferences to the signal data bus must be applied toeach of the multiple data buses. If you are using amodule with devices organized to increase memorydepth, the CS pins and upper address pin(s) need to beused to select which devices are being accessed. moduleswithout a RESET pin have the RESET internallyconnected to Vcc. Refer to the product data sheet blockdiagram and pin configuration to clarify the organizationof the module.