资 源 简 介
These 16-bit buffers/drivers are designed specifically for low-voltage (3.3-V) V operaTIon, but with theCCcapability to provide a TTL interface to a 5-V system environment.The devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. The devices providenoninverTIng outputs and complementary output-enable (OE and OE) inputs.When V is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down.CCHowever, to ensure the high-impedance state above 1.5 V, OE should be TIed to V through a pullup resistorCCand OE should be TIed to GND through a pulldown resistor; the minimum value of the resistor is determined bythe current-sinking/current-sourcing capability of the driver.Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.