资 源 简 介
The AD5305/AD5315/AD53251 are quad 8-， 10-， and 12-bit buffered voltage output DACs in a 10-lead MSOP that operate from a single 2.5 V to 5.5 V supply， consuming 500 μA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing with a slew rate of 0.7 V/μs. A 2-wire serial interface that operates at clock rates up to 400 kHz is used. This interface is SMBus compaTIble at VDD 《 3.6 V. MulTIple devices can be placed on the same bus. The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneously using the software LDAC funcTIon. The parts incorporate a power-on reset circuit， which ensures that the DAC outputs power up to 0 V and remain there unTIl a valid write takes place to the device. There is also a software clear function to reset all input and DAC registers to 0 V. The parts contain a power-down feature that reduces the current consumption of the devices to 200 nA @ 5 V （80 nA @ 3 V）。 The low power consumption of these parts in normal operation makes them ideally suited for portable battery-operated equipment. The power consumption is 3 mW at 5 V， 1.5 mW at 3 V， reducing to 1 μW in power-down mode.
