资 源 简 介
Download the latest version of the EV kit software， 14871EVRxx.ZIP and save it a temporary folder.
Open the .ZIP file and extract the .EXE file to your preferred locaTIon. Note that the .EXE file is actually the EV kit GUI and not an install program. You can store the .EXE file where you like and then uninstall by simply deleTIng it.
Connect a USB cable from the PC to the MAX14871EVKIT board. LED2 will glow red when the microprocessor is properly powered. LED4 blinks green when the microprocessor begins running the firmware.
Double click the MAX14871EVRxx.EXE file to run the applicaTIon.
The MAX14871 EV kit software defaults to shutdown mode， with both driver outputs （M1 and M2） disabled. Select the duty cycle and direcTIon to start moving the motor.
