资 源 简 介
The DAC8143 is a 12-bit serial-input daisy-chain CMOS D/A converter that features serial data input and buffered serial data output. It was designed for mulTIple serial DAC systems， where serially daisy-chaining one DAC after another is greatly simplified. The DAC8143 also minimizes address decoding lines enabling simpler logic interfacing. It allows three-wire interface for any number of DACs： one data line， one CLK line and one load line. Serial data in the input register （MSB first） is sequenTIally clocked out to the SRO pin as the new data word （MSB first） is simultaneously clocked in from the SRI pin. The strobe inputs are used to clock in/out data on the rising or falling （user selected） strobe edges （STB1， STB2， STB3， STB4）。 When the shift register’s data has been updated， the new data word is transferred to the DAC register with use of LD1 and LD2 inputs. Separate LOAD control inputs allow simultaneous output updaTIng of mulTIple DACs. An asynchronous CLEAR input resets the DAC register without altering data in the input register. Improved linearity and gain error performance permits reduced circuit parts count through the elimination of trimming components. Fast interface timing reduces timing design considerations while minimizing microprocessor wait states. The DAC8143 is available in plastic packages that are compatible with autoinsertion equipment. Plastic packaged devices come in the extended industrial temperature range of –40°C to +85°C.
