资 源 简 介
The Infineon TriCore provides an Interrupt System with a high safety standard. Thisdocument contains some instructions on how to initiate an Interrupt from an external device. First it will show you how to trigger an Interrupt Service Request by an impulse on Port 0 or Port 1. Then in the second part of the document you can find hints how to debounce impulses to enable the use of a simple switch as input device.1 Overview..32 The External Interrupt 42.1 The general settings ....52.2 Service request specific Individual settings 52.3 Enabling the GPTU by setting the Clock Register CLC .......62.4 The signal path from Port 0 or Port 1 to GTSRSEL 72.5 Example: The External Interrupt ..83 How to debounce a signal using the GPT Appendix ..113.1 Example: External Interrupt - debounced by using the GPT 124 Appendix .134.1 xxSRC – Source xx Service Request Control Register ....134.2 ICR – Interrupt Control Register .144.3 GTSRSEL – GPT Service Request Source Selection Register 154.4 GTCLC – GPT Clock Control Register .....164.5 T2AIS – Timer T2/T2A External Input Selection Register 174.6 T2ES – Timer T2 External Input Edge Selection Register ..184.7 T2CON – Timer T2 Mode Control and Status Register ....194.8 T2RCCON – Timer T2 Reload/Capture Mode Control Register 204.9 T2RC0 – Timer T2 Reload/Capture Register 0 214.10 CLC – Clock Control Register 21
