资 源 简 介
The AD5689/AD5687 members of the nanoDAC+™ family are low power, dual, 16-/12-bit, buffered voltage output digital-toanalog converters (DACs)。 The devices include a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2)。 The AD5689/AD5687 operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and exhibit less than 0.1% FSR gain error and 1.5 mV offset error performance. Both devices are available in a 3 mm &TImes; 3 mm LFCSP and a TSSOP package. The AD5689/AD5687 also incorporate a power-on reset circuit and a RSTSEL pin that ensure that the DAC outputs power up to zero scale or midscale and remain there unTIl a valid write takes place. Each part contains a per channel power-down feature that reduces the current consumpTIon of the device to 4 µA at 3 V while in power-down mode. The AD5689/AD5687 use a versaTIle serial peripheral interface that operates at clock rates up to 50 MHz. Both devices contain a VLOGIC pin that is intended for 1.8 V/3 V/5 V logic.