首页| 行业标准| 论文文档| 电子资料| 图纸模型
购买积分 购买会员 激活码充值

您现在的位置是:团子下载站 > 其他 > SN74ALVCHS162830,pdf(1-BIT TO

SN74ALVCHS162830,pdf(1-BIT TO

  • 资源大小:297
  • 上传时间:2021-09-03
  • 下载次数:0次
  • 浏览次数:24次
  • 资源积分:1积分
  • 标      签: driver

资 源 简 介

This 1-bit to 2-bit address driver is designed for 2.3-V to 3.6-V VCC operaTIon. Diodes to VCC have been added on the inputs to clamp overshoot. AcTIve bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. The outputs, which are designed to sink up to 12 mA, include equivalent 26- series resistors to reduce overshoot and undershoot. To ensure the high-impedance state during power up or power down, the output-enable (OE) input should be TIed to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
VIP VIP