资 源 简 介
These 36-bit UBTs combine D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes.
Data flow in each direcTIon is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transiTIon of CLKAB. Data flow for B to A is similar to that of A to B, but uses OEBA, LEBA, and CLKBA.
Output-enable OEAB is acTIve high. When OEAB is high, the outputs are acTIve. When OEAB is low, the outputs are in the high-impedance state.
