首页| 行业标准| 论文文档| 电子资料| 图纸模型
购买积分 购买会员 激活码充值

您现在的位置是:团子下载站 > 实用工具 > 浅析STM32F105xx和STM32F107xx的异同

浅析STM32F105xx和STM32F107xx的异同

  • 资源大小:1.84 MB
  • 上传时间:2021-08-26
  • 下载次数:0次
  • 浏览次数:102次
  • 资源积分:1积分
  • 标      签: 振荡器 闪存

资 源 简 介

Features   ■ Core: ARM 32-bit Cortex™-M3 CPU   – 72 MHz maximum frequency,   1.25 DMIPS/MHz (Dhrystone 2.1)   performance at 0 wait state memory   access   – Single-cycle mulTIplicaTIon and hardware   division   ■ Memories   – 64 to 256 Kbytes of Flash memory   – 64 Kbytes of general-purpose SRAM   ■ Clock, reset and supply management   – 2.0 to 3.6 V applicaTIon supply and I/Os   – POR, PDR, and programmable voltage   detector (PVD)   – 3-to-25 MHz crystal oscillator   – Internal 8 MHz factory-trimmed RC   – Internal 40 kHz RC with calibraTIon   – 32 kHz oscillator for RTC with calibration   ■ Low power   – Sleep, Stop and Standby modes   – VBAT supply for RTC and backup registers   ■ 2 × 12-bit, 1 µs A/D converters (16 channels)   – Conversion range: 0 to 3.6 V   – Sample and hold capability   – Temperature sensor   – up to 2 MSPS in interleaved mode   ■ 2 × 12-bit D/A converters   ■ DMA: 12-channel DMA controller   – Supported peripherals: timers, ADCs, DAC,   I   2Ss, SPIs, I2Cs and USARTs   ■ Debug mode   – Serial wire debug (SWD) & JTAG interfaces   – Cortex-M3 Embedded Trace Macrocell™   ■ Up to 80 fast I/O ports   – 51/80 I/Os, all mappable on 16 external   interrupt vectors and almost all 5 V-tolerant   ■ CRC calculation unit, 96-bit unique ID   ■ Up to 10 timers with pinout remap capability   – Up to four 16-bit timers, each with up to 4   IC/OC/PWM or pulse counter and   quadrature (incremental) encoder input   – 1 × 16-bit motor control PWM timer with   dead-time generation and emergency stop   – 2 × watchdog timers (Independent and   Window)   – SysTick timer: a 24-bit downcounter   – 2 × 16-bit basic timers to drive the DAC   ■ Up to 14 communication interfaces with pinout   remap capability   – Up to 2 × I2C interfaces (SMBus/PMBus)   – Up to 5 USARTs (ISO 7816 interface, LIN,   IrDA capability, modem control)   – Up to 3 SPIs (18 Mbit/s), 2 with a   multiplexed I2S interface that offers audio   class accuracy via advanced PLL schemes   – 2 × CAN interfaces (2.0B Active) with   512 bytes of dedicated SRAM   – USB 2.0 full-speed device/host/OTG   controller with on-chip PHY that supports   HNP/SRP/ID with 1.25 Kbytes of dedicated   SRAM   – 10/100 Ethernet MAC with dedicated DMA   and SRAM (4 Kbytes): IEEE1588 hardware   support, MII/RMII available on all packages
VIP VIP