资 源 简 介
This 16-bit edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCC operaTIon.
The SN74LVC16374 is parTIcularly suitable for implemenTIng buffer registers, I/O ports, bidirecTIonal bus drivers, and working registers. It can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components.
