C8051F047 pdf datasheet

C8051F04725 MIPS, 32 kB Flash, 10-Bit ADC, 64-Pin Mixed-Signal MCU Analog Peripherals10-Bit ADC- ±1 LSB INL; guaranteed monotonic- Programmable throughput up to 100 ksps- 13 external inputs; programmable as single-ended or differenTIal- Programmable amplifier gain: 16, 8, 4, 2, 1, 0.5- Data-dependent windowed interrupt generator- Built-in temperature sensor (±3 °C)High-Voltage DifferenTIal Amplifier- 60 V common mode input range- Offset adjust from –60 to +60 V- 16 gain setTIngs from 0.05 to 16Three ComparatorsInternal Voltage ReferencePrecision VDD Monitor/Brown-out DetectorOn-Chip JTAG Debug & Boundary Scan- On-chip debug circuitry facilitates full speed, non-intrusive in-systemdebug (no emulator required)- Provides breakpoints, single stepping, watchpoints, stack monitor, programtrace memory- Inspect/modify memory and registers- Superior performance to emulaTIon systems using ICE-chips, targetpods, and sockets- IEEE1149.1 compliant boundary scanHigh-Speed 8051 μC Core- Pipelined instruction architecture; executes 70% of instructions in 1 or 2system clocks- Up to 25 MIPS throughput with 25 MHz system clock- Expanded interrupt handlerMemory- 4352 bytes data RAM- 32 kB Flash; in-system programmable in 512-byte sectors (512 bytesare reserved)- External parallel data memory interfaceCAN Bus 2.0B- 32 message objects- ”Mailbox" implementation only interrupts CPU when neededDigital Peripherals- 32 port I/O; all are 5 V tolerant- Hardware SMBus™ (I2C™ compatible), SPI™, and two UART serialports available concurrently- Programmable 16-bit counter array with 6 capture/compare modules- 5 general-purpose 16-bit counter/timers- Dedicated watchdog timer; bidirectional reset- Real-time clock mode using timer 3 or PCAClock Sources- Internal programmable 2% oscillator: up to 25 MHz- External oscillator: Crystal, RC, C, or ClockSupply Voltage: 2.7 to 3.6 V- Typical operating current: 10 mA at 25 MHz- Multiple power saving sleep and shutdown mode64-Pin TQFPTemperature Range: –40 to +85 °C