资 源 简 介
The STC232E is low power single supply RS232 interface. The device consists of two line drivers, two line receivers,and dual charge pump circuit. The device meets the requirements of TIA/EIA-232 standard and provides the electricalinterface between an asynchronous communicaTIon controller and the serial-port connector.The on chip charge pump and four small external capacitors act as onboard DC to DC converter, allow chip operatedfrom single 5V supply, eliminaTIng the need for ±10V power supplies, reduce cost and board space. Chip power supplycurrent is specified at 8.0 mA maximum, making the device ideal for battery and power conscious applicaTIons.The device operates at data signaling rates over 120Kb/s. The slew rate of driver is set internally less than 30V/μs andthe receivers feature internal noise filtering, eliminating the need for external slew rate and filter capacitors for reliableoperation. The driver inputs and receiver outputs are TTL and CMOS compatible.STC232E comes in 16 pin DIP, SOP and SSOP packages, operating over the commercial and industrial temperatureranges.The ESD tolerance has been upgraded on these devices to over ±15KV for both Human Body Model and IEC1000-4-2Air Discharge Method, without latchup. These devices are pin-to-pin compatible with MAX202/232 devices as well asother popular industry standards.
