资 源 简 介
The TPS6101x devices are boost converters intended for systems that are typically operated from a single- or dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery.
The converter output voltage can be adjusted from 1.5 V to a maximum of 3.3 V, by an external resistor divider or, is fixed internally on the chip. The devices provide an output current of 200 mA with a supply voltage of only 0.9 V. The converter starts up into a full load with a supply voltage of only 0.9 V and stays in operaTIon with supply voltages down to 0.8 V.
The converter is based on a fixed frequency, current mode, pulse-width-modulaTIon (PWM) controller that goes automaTIcally into power save mode at light load. It uses a built-in synchronous recTIfier, so, no external Schottky diode is required and the system efficiency is improved.