首页| 行业标准| 论文文档| 电子资料| 图纸模型
购买积分 购买会员 激活码充值

您现在的位置是:团子下载站 > 其他 > ADL5565 差动放大器参考设计

ADL5565 差动放大器参考设计

  • 资源大小:847.29KB
  • 上传时间:2021-11-25
  • 下载次数:0次
  • 浏览次数:41次
  • 资源积分:1积分
  • 标      签: Arrow ADL5565 差动放大器

资 源 简 介

1 / 2 说明 ADL5565-EVALZ, EvaluaTIon Board is a fully populated, 4-layer, FR4-based evaluaTIon board. For normal operaTIon it requires a single 5 V/ 1 00 mA power supply. The 5V power supply should be connected to the test loops labeled VPOS and GND. The RF input signal is applied to the SMA connector labeled J 1 . The RF output is available at the SMA connector labeled J 2 . The evaluaTIon board may be converted to a fully differential input and output by installing SMA connectors J 2 and J4, removing R 1 3 and R 1 4, installing 0 ohm jumpers R 1 2 and R 1 5, removing T 1 & T 2 and placing jumpers across the transformer pads. The 3 pin header, P 1 controls the enable function 主要特色 收益 6 | 1 2 | 1 5.5 dB 耗材数量 单 电源电压 2 .8至5. 2 V
VIP VIP