资 源 简 介
IntroducTIon The AMIS−30421 is a micro-stepping stepper motor bridge controller for large current range bipolar applicaTIons. The chip interfaces via a SPI interface with an external controller in order to control 2 external power NMOS H−bridges. It has an on-chip voltage regulator， current sensing， self adapTIng PWM controller and pre-driver with smart slope control switching allowing the part to be EMC compliant with industrial and automoTIve applications. It uses a proprietary PWM algorithm for reliable current control. The AMIS−30421 contains a current translation table and takes the next micro-step depending on the clock signal on the “NXT” input pin and the status of the “DIR” （direction） register or input pin. The chip provides a so-called “Speed and Load Angle” output. This allows the creation of stall detection algorithms and control loops based on load angle to adjust torque and speed. The AMIS−30421 is implemented in a mature technology， enabling fast high voltage analog circuitry and multiple digital functionalities on the same chip. The chip is fully compatible with automotive voltage requirements. The AMIS−30421 is easy to use and ideally suited for large current stepper motor applications in the automotive， industrial， medical and marine environment. With the on−chip voltage regulator it further reduces the BOM for mechatronic stepper applications.
